Locating the Handset
You can find handsets by paging them from the base. Press the HANDSET
LOCATOR (page) button on the base station to ring all handsets:
•
All handsets within range of the base will ring for one minute, even if the
volume is off.
•
To end the locator page, press
•
To silence the locator page on one handset only, press
Screen icons
The following screen icons indicate your phone's current status:
Icon
Status
Indicates signal strength, from one bar (weak) to four bars (strong). Flashes
when out of range.
Indicates battery strength from 1/3 to 3/3. Flashes when empty.
The ringer is off.
Headset—audio is coming through a headset after the HEADSET key was
pressed.
Speakerphone—the speakerphone is active.
Microphone is muted.
Call Forward All is on.
Do Not Disturb is on.
â
or place the handset in its charger.
STOP
23
.
SILENCE