Vlan/Rate Control - Draytek Vigor2800 Series User Manual

3 . 2 . 4 V L A N / R
3 . 2 . 4 V L A N / R
Virtual LAN function provides you a very convenient way to manage hosts by grouping them
based on the physical port. You can also manage the in/out rate of each port. Go to LAN menu
and select VLAN/Rate Control. The following page will appear. Click Enable to invoke
VLAN function. Rate Control manages the transmission rate of data in and out through the
router.
Enable
P1 – P4
VLAN0-3
Enable
Out
In
To add or remove a VLAN, please refer to the following example.
1. If, VLAN 0 is consisted of hosts linked to P1 and P2 and VLAN 1 is consisted of hosts
linked to P3 and P4.
Vigor2800 Series User's Guide
a t e C o n t r o l
a t e C o n t r o l
Check this box to enable this function (for VLAN
Configuration).
Check the box to make the computer connecting to the port
being grouped in specified VLAN. Be aware that each port can
be grouped in different VLAN at the same time only if you
check the box. For example, if you check the boxes of
VLAN0-P1 and VLAN1-P1, you can make P1 to be grouped
under VLAN0 and VLAN1 simultaneously.
This router allows you to set 4 groups of virtual LAN.
Check this box to enable this function (for Rate Control). The
rate control will limit the transmission rate for data in and out.
Check the corresponding boxes to enable the rate control
function for different ports.
It decides the rate of data transmission for output. When you
check the box of Enable, please also decide the rate by using
the drop down list of Rate.
It decides the rate of data transmission for input. When you
check the box of Enable, please also decide the rate by using
the drop down list of Rate.
31