Saving Configuration - Draytek Vigor2800 Series User Manual

Online status for Routed IP
Primary DNS
Secondary DNS
IP Address (in LAN)
TX Packets
RX Packets
GW IP Addr:
IP Address (in WAN)
TX Rate
RX Rate
Up Time
TX Blocks
RX Blocks
Corrected Blocks
Uncorrected Blocks
Mode
State
Up Speed
Down Speed
SNR Margin
Loop Att.
2 . 4 S a v i n g C o
2 . 4 S a v i n g C o
Each time you click OK on the web page for saving the configuration, you can find messages
showing the system interaction with you.
Vigor2800 Series User's Guide
Displays the assigned IP address of the primary DNS.
Displays the assigned IP address of the secondary DNS.
Displays the IP address of the LAN interface.
Displays the total transmitted packets at the LAN interface.
Displays the total number of received packets at the LAN interface.
Displays the assigned IP address of the default gateway.
Displays the IP address of the WAN interface.
Displays the speed of transmitted packets at the WAN interface.
Displays the speed of received packets at the WAN interface.
Displays the total system uptime of the interface.
Displays the total number of transmitted ATM Blocks.
Displays the total number of received ATM Blocks.
Displays the total l number of received ATM Blocks corrupted but
corrected.
Displays the total number of received ATM Blocks corrupted but
uncorrected.
Displays the modulation mode used: G.DMT, G.Lite, or T1.413.
Displays the DSL line status.
Displays the transmission speed of uploading data (bits/ second).
Displays the transmission speed of downloading data (bits/ second).
Displays the value of Signal Noise Ratio Margin (dB). The higher
value has better signal quality.
Displays the value of subscribed Loop Attenuation.
n f i g u r a t i o n
n f i g u r a t i o n
15