Led Indicator Details - Toshiba Strata IPT User Manual

LED Indicator Details

Each line and feature button has a LED next to it which indicates the status of the line or feature
associated with the button. Line LEDs light red or green and flash at varying rates to indicate call
status (see Table 15).
Table 15: LED Indicators
LED
Extension In-Use
(access outside line)
Incoming Call
(while ringing)
Hold (outside line) If using Pooled
Line Grp, the hold indication is only
at the station that places the call on
hold.
Hold — Consultation
(during consultation/transfer
another station)
Hold — Exclusive (outside line)
Hold — Recall
(when held call recalls your idle
station)
Hold — Exclusive Recall
Internal Call
(while station ringing)
Busy Station Transfer
(outside call transferred to your
busy station from a designated
station or AA)
Conference
STRATA IPT/DKT FEATUREPHONE USER GUIDE
Your Station (Green)
Interval Rates
2 seconds On, 1/8 second Off
– 1/8 second On/Off
1 second on at 10 pulses/
second –1 second Off
4 /pulses second for 1/8 second
On/Off
10 pulses/second
to
10 pulses/second
1 second at 2 pulses/second,
1 second at 10 pulses/second
1 second at 2 pulses/second,
1 second at 10 pulses/second
Your extension button flashes
10 pulses/second–1 second
Off
4 pulses/second, 1/8 second
On/Off
10 pulses/second
Other Station (Red)
steady
one second On/Off
1/2 second On/Off
steady
steady
flashes
steady
[SDN] red flashing or
green ringing
3/4 second on, 1/8
second Off
steady
Toshiba Business Communications Division
102 of 124