Appendix B – Button Labels - Toshiba Strata IPT User Manual

APPENDIX B – BUTTON LABELS
All Flexible Buttons must be programmed for your featurephone in system programming and vary for
individual featurephones. If a button does not appear on your display or featurephone keystrip label,
see your System Administrator for button assignments.
The button labels in Table 16
Programmable buttons are the unmarked buttons on your keystrip.
Table 16: Feature Button Definitions
Button Definitions
Account Code – Press to enter a Voluntary Account Code anytime during a Central
Account
Office (outside) line call without interrupting the conversation.
Code
All Call All Call Voice Page – Press to page all of the featurephones in the All Call Page group.
Page
Auto Busy
Automatic Busy Redial – Press to set up Automatic Busy Redial after receiving a busy tone on
Redial a dialed outside line call (not available when calling on Tie or Direct Inward
Dialling (DID) outside lines).
Auto
Automatic Callback – Press to recall a busy station or station in the Do Not Disturb (Do
Callback
Not Disturb) mode as soon as that station becomes idle or deactivates Do Not Disturb.
Also used for outside line queuing when all lines are busy.
Call Frwd
Call Forward-All Calls – Press to forward all calls to another station or voice mail
All Calls
device.
Call Frwd
Call Forward-Busy – Press to forward calls immediately to another station or voice mail
Busy
device when your station is busy or in the Do Not Disturb mode.
Call Frwd Call Forward-Busy/No Answer – Press to forward calls immediately to another station
Busy NAns
or voice mail device when your station is busy or in Do Not Disturb mode. Also forwards
calls when your station is not answered after 8~60 seconds (set at your station).
STRATA IPT/DKT FEATUREPHONE USER GUIDE
are for the Programmable Buttons on your featurephone.
Toshiba Business Communications Division
110 of 124