User Programming Mode; Flexible Button Codes; Setting/Changing A Flexible Button's Function - Toshiba Strata IPT User Manual

In addition to the Programming Mode, an advanced programming function enables your System
Administrator to individually turn On/Off the featurephone's beep tone, handset call waiting tone,
and microphone background noise cancellation option. This mode enables LCD contrast adjustment
and testing the Strata IPT3014F LCD screen.

User Programming Mode

To enter User Programming Mode, press the
#9876
...or dial . "USER PROG MODE" appears on your LCD. The Program
LED is steady green.
To exit User Program Mode, press
... or go off- and on-hook press
Note:
A IPT equipped with a headset adapter ignores the hookswitch. It can only exit
User Programming by timing out (approximately 15 seconds).

Flexible Button Codes

Flexible buttons are the unassigned buttons on your keystrip that can be used to store features. The
number of available Flexible Buttons depends on your featurephone model and how the buttons are
preassigned by the System Administrator. See
The following steps enable you to program features onto Flexible Buttons for one- touch feature
access.

Setting/Changing a Flexible Button's Function

#9876
1. Press to enter User Programming Mode.
Hold
2. Press .
3. Press the Flexible Button to set or change.
4. Enter the Flexible Button Code (see
5. Press the same Flexible Button (flashing) to save the setting. "DATA PROGRAMMED" appears
on your LCD.
STRATA IPT/DKT FEATUREPHONE USER GUIDE
Program
Program
#9876
.
pages 15
Table 12), plus any optional parameters.
button
and 23 for the Flexible Button locations.
Toshiba Business Communications Division
96 of 124