Chapter 2 - The Basics; Important - Read First; What's My Line; Which Outgoing/Incoming Call Features Do I Have - Toshiba Strata IPT User Manual

CHAPTER 2 - THE BASICS

This chapter shows you the basic operation of your IPT1020F-SD, IPT2000-series, Strata
DKT3000 and Strata DKT 3500-series featurephones.

Important - Read First

Be sure to check with your System Administrator and make sure you know which features are
enabled on your system. Use the check boxes
have.
Note:
LEDs on your featurephone flash at different speeds depending on the function performed. Flash rates can
be found under "LED Indicator Details" on page

What's my Line?

Throughout this guide, the word "Line" is mentioned. For example, you will be instructed to "select a
Line." "Line" can be:
q Line button
q Pooled Line Group button
q Group Line button
q
Line out requiring an access code - where you enter an outside line or line group access code
9
(for example, dialling to get an outside line).
Check mark which Line type you have, then use that selection when instructed to
"select a Line."

Which Outgoing/Incoming Call Features Do I Have?

Check mark here which outgoing/incoming features you have on your system.
q
Automatic Line Selection (ALS): When making outgoing calls, you have ALS if when you lift the
Spkr
handset or press you hear dial tone and the Line Light Emitting Diode (LED) lights steady
green. The LCD displays the station number and the seized outside line.
q Ringing Line Preference: You answer an incoming line ringing your station by lifting the handset
Spkr
or pressing . You do not have to press an extension button to answer.
q Tone First Signalling: Internal incoming call – you hear successive ring tones, then lift the
Spkr
handset or press to answer the call.
STRATA IPT/DKT FEATUREPHONE USER GUIDE
q throughout this book to mark which features you
102.
Toshiba Business Communications Division
24 of 124