Led Indicator Details - Toshiba DKT3010-SD - Digital Phone User Manual

User Programming

LED Indicator Details

LED Indicator Details
Each line and feature button has a LED next to it which indicates the status of the line
or feature associated with the button. Line LEDs light red or green and flash at varying
rates to indicate call status (see
Table 12 LED Indicators
Extension In-Use
(access outside line)
Incoming Call
(while ringing)
Hold (outside line) If using
, the hold indication is only at the
station that places the call on hold.
Hold – Consultation
(during consultation/transfer to another
station)
Hold – Exclusive (outside line)
Hold – Recall
(when held call recalls your idle station)
Hold – Exclusive Recall
Internal Call
(while station ringing)
Busy Station Transfer
(outside call transferred to your busy
station from a designated station or AA)
After disconnecting first call...
Conference
78
LED
Table 12).
Your Station (Green)
2 seconds On, 1/8 second Off
— 1/8 second On/Off
1 second on at 10 pulses/
second —1 second Off
4 pulses/second for 1/8
second On/Off
10 pulses/second
10 pulses/second
1 second at 2 pulses/second,
1 second at 10 pulses/second
1 second at 2 pulses/second,
1 second at 10 pulses/second
Your extension button flashes
10 pulses/second—1 second
Off
4 pulses/second, 1/8 second
On/Off
10 pulses/second
10 pulses/second
Other Station (Red)
Interval Rates
steady
one second On/Off
1/2 second On/Off
steady
steady
flashes
steady
[SDN] red flashing or
green ringing
3/4 second on, 1/8
second Off
2 pulses/second
steady
Strata CTX DKT/IPT Telephone 06/03