Replacing The Pen Tip - Fujitsu STYLISTIC Q572 Operating Manual

Replacing the pen tip

With use, the pen tip may become worn or may pick up foreign particles that can scratch the screen.
A damaged or worn tip may not move freely, causing unpredictable results when using the pen.
If your pen exhibits these problems, you should replace the pen tip. To do this, use the supplied tool (1).
If the tip is worn or damaged, discard it.
Fujitsu
1
Working with the Tablet PC
► To remove the tip, position it in the gap
between the two ends of the tool supplied.
► Pinch the two ends of the supplied tool
together so that the tip is firmly clasped,
then pull it from the barrel.
► Replace the tip with one of the new tips
that were supplied with your pen. Insert
the flat end of the tip into the barrel
and exerting gentle pressure, push it
in until it is firmly in place.
33