Table of Contents
Advertisement
— Reorient or relocate the receiving an-
tenna.
— Increase the separation between the
equipment and receiver.
— Connect the equipment into an outlet
on a circuit different from that to which
the receiver is connected.
— Consult the dealer or an experienced
radio/TV technician for help.
FCC Note: This device complies with part
15 of the FCC rules. Operation is subject
to the following two conditions: (1) This de-
vice may not cause harmful interference,
and (2) this device must accept any inter-
ference received, including interference
that may cause undesired operation. In ac-
cordance with part 15 of the FCC rules,
the user is cautioned that any changes or
modifications not expressly approved by
Polycom Inc. could void the user's autho-
rity to operate the equipment.
SAR: Device has been tested for SAR
compliance for head and body worn confi-
gurations. The highest reported SAR va-
lues are: 743X: 0.037 W/kg head, 0.01
W/kg body and 744X: 0.037 W/kg head,
0.01 W/kg body.
IC Note: Operation is subject to the follo-
wing two conditions: (1) This device may
not cause interference, and (2) this device
must accept any interference, including in-
terference that may cause undesired ope-
ration of the device. The Term "IC": before
the certification/ registration number only
signifies that the Industry Canada techni-
cal specifications were met.
Privacy of communications may not be en-
sured when using this telephone.
This Class [B] digital apparatus complies
with Canadian ICES-003.
Cet appareil numérique de la classe [B]
est conforme à la norme NMB-003 du Ca-
nada.
43
Advertisement
Table of Contents
