Function Menu - GE NetworX NX-148E User Manual

Auxiliary Key - If programmed, you can activate the auxiliary alarm by pressing
the Emergency Activation [Auxiliary] key for two seconds. If your system is
connected to a monitoring center, an emergency report could be sent to that
center. This key should only be pressed in an emergency situation requiring
response by emergency personnel.
Police (Panic/Hold-Up) Key - If programmed, when the Emergency Activation
[Police] key is pressed for two seconds, a local audible alarm will sound. If your
system is connected to a monitoring center, an emergency report could be
transmitted to that center. These keys should only be pressed in an emergency
situation requiring immediate response by law enforcement personnel. NOTE:
Some Panic/Hold-Up alarms are programmed to be silent at the protected site
while reporting an alarm to the monitoring center. Check with your installing
company to determine how your security system will respond to the Panic/Hold-Up
activation.

FUNCTION MENU

The functions listed below are found in the Function Menu.
Press r
Step 1 The display will now begin scrolling though a list of functions
and the corresponding numbers associated with those functions.
Step 2 Press the number listed on the display in order to access that particular
function. Hint: If you already know the function numbers simply press [r] followed
by the function number.
The following list of menu selections will scroll automatically. NOTE: Some of the
functions are not listed because they are installer level functions. Each time the
[r] key is pressed the next menu item will be displayed. Press # to exit to this
menu.
Select an Option
Press for Help
ù=Zone Review
0=Set Tone
1=Master Mode
2=Service Check
3=Alarm Memory
44=Test
10
This is a sample of the display. The list
below reflects the available functions.
45=Display Test
46=Light Control
49=Español
5=User PIN
6=User Authority
7=Detector Reset
90=Log Review
91=View Settings
97=Set Date/Time
CHIME=Walk Test
EXIT=Silent Exit
NX-148E LCD Keypad