Lightbulb Removal And Replacement; Troubleshooting Guide - Dirt Devil Vacuum Cleaner Owner's Manual

TOOL REQUIRED: FLATHEAD SCREWDRIVER
WARNING: TO REDUCE THE RlSK OF INJURY FROM MOVING PARTS
-
UNPLUG CLEANER BEFORE REMOVING OR REPLACING LIGHTBULB.
Lean cleaner handle back. Pull bulb out of socket to
Insert end of a standard (flat remove. Do not twist. Push
head) screwdriver into side bulb into socket to replace.
slot and ply outward to pop Snap headlight lens panel
headlight lens out. back into place.
T h i s cleaner uses a common automotive lamp #906, 13.0 volts. For bulb
replacement, call 1-800-321-1134 or your local auto parts store.
WARNING: TO
Problem
Cleaner won't run
Cleaner won't pick-up
or low suction
Dust escaping from cleaner
Cleaner tools won't pick up
Headlight not working
Cleaner is difficult to push
[EDUCE RlSK OF PERSONAL INJURY
-
UNPLUG CLEANER BEFORE SERVICING
Possible Reasons
1. Power cord not firmly plugged into outlet.
2. Blown fuse or tripped breaker.
3. Needs service.
1. CarpeVHose Selector on wrong setting.
2. Dirt container not installed correctly.
3. Dirt container full.
4. Blushroll wom.
5. Broken or worn belt.
6. Clogged PERMA FILTER
@.
7. Nonleldirt passage hose clogged.
8. Carpet height setting is incorrect.
9. Hose inlet clogged.
1. Dirt container full.
2. Dirt container not installed correctly.
3. Hose not installed correctly.
1. CarpetIHose Selector on wrong setting.
2. Hose clogged.
3. Hose inlet clogged.
4. Dirt container full.
5. Clogged PERMA FILTER
Q.
1. Bulb burnt out.
2. Loose electrical wires.
1. Carpet height setting is incorrect.
Possible Solutions
1. Plug cord in firmly.
2. Check fuse or breaker in your home. Replace
fuseireset breaker.
3. Take to service center or call 1-800-321-1 134.
1. Select proper setting carpethose
-
Pg. 5.
2. Review
dirt
container removal a r i d repkcwnent
-
Pg. 6.
3. Empty dirt container
-
Pg. 6.
4.
Replace brushroll
-
Pg. 7.
5. Replace belt
-
Pg. 7.
6. Remove PERMA FILTERQ and clean
-
Pg. 6.
7. Remove base n o d e cover; remove obstruction
OR Remove hose; remove obsbuction.
8. Set carpet height adjustment to appmpriate
setting for carpet being cleaned
-
Pg. 5.
9. Remove hose and clean inlet.
1.
Empty dirt container
-
Pg. 6.
2. Review dirt container m v a l
and replacement
-
Pg. 6.
3.
Review hose installation
-
Pg. 5.
1. Select proper setting carpethose
-
Pg. 5.
2. Remove hose and tools; remove obshdion
-
Pg. 5.
3. Remove hose and clean inlet.
4. Empty dirt container
-
Pg. 6.
5. Remove PERMA FILTER and clean
-
Pg. 7.
1. Replace bulb
-
Pg. 8.
2. Call I
-
800-321 -1 134 for nearest authorized
RoyalQ Dealer.
1. Set carpet height adjustment to appmpriate
setting for carpet being cleaned
-
Pg. 5.
ANY OTHER SERVICING SHOULD BE DONE BY AN AUTHORIZED SERVICE REPRESENTATIVE
CUSTOMER SERVICE (1-800-321 -11 34)
In the event that further assistance is required, see your Yellow Pages for an author~zed Royal
@
Dealer. Costs of any transportation
to and from any place of repair are to be paid by the owner. The service parts used in this unit are easily replaced and readi
ly avail-
able from an authorized Royal
@
Dealer or retailer. Always identify your cleaner by the model number and manufacturing code when
requesting information or ordering replacement parts. (The model number appears on the back of the cleaner.)
8