Hepa Filter Removal And Replacement; Belt Removal And Replacement; Lightbulb Removal And Replacement - Dirt Devil Platinum Force Owner's Manual

For additional filtration, a HEPA media exhaust filter is located below the dirt cup. For best performance, replace filter yearly.
TOOL REQUIRED: PHILLIPS SCREWDRIVER
HEPA filter part # 3-860057-000, is located below the dirt container.
NOTE: Unplug cleaner before changing filter.
NOTE: For best performance, replace filter yearly.
1.
Remove dirt container. To
remove the filter cover lid,
use a Phillips screwdriver
to remove the (1) screw.
This vacuum contains a permanent belt. If you experience problems with this unit, please call
1-800-321-1134 (USA & Canada) to locate the nearest Service Center.
TOOL REQUIRED: PHILLIPS SCREWDRIVER
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK - UNPLUG CLEANER BEFORE REMOVING OR REPLACING LIGHTBULB.
NOTE: This cleaner uses a common automotive lamp #906, 13.0 volts.
1.
Lean cleaner back. Use a
Phillips screwdriver to
unscrew the two screws
located on each side of the
lens.
HEPA FILTER REMOVAL & REPLACEMENT
2.
Pull lid up and away from
cleaner.
BELT REMOVAL & REPLACEMENT
LIGHTBULB REMOVAL & REPLACEMENT
2.
Pull bulb out of socket to
remove. Do not twist. Push
bulb into socket to replace.
Screw headlight lens back
into place.
3.
Grasp HEPA filter cartridge
and pull up and out.
IMPORTANT: DO NOT
clean.To replace: Insert
HEPA filter into housing.
Replace screw and filter
cover.
To purchase replacement bulbs, call
1-800-321-1134 (USA & Canada).
7
For HEPA filter replacements call
1-800-321-1134 (USA & Canada).