Receiving E-Mail Or Internet Fax - Brother NC-8100h User Manual

Receiving E-mail or Internet Fax

There are 2 ways you can receive E-mail messages:
•
POP3 receiving at regular intervals
•
POP3 receiving (manually initiated)
Using POP3 receiving the MFC machine must poll the E-mail server to receive
the print jobs. This polling can occur at set intervals (for example, you can
configure the MFC to poll the E-mail server at 10 minute intervals) or you can
manually poll the server by pressing the Shift + Start button.
If your MFC starts to receive E-mail print jobs, the LCD panel will reflect this
activity. For example, you will see "RECEIVING" on the LCD panel followed
by "xx MAIL(S)". If you press the Shift + Start buttons to manually poll the E-
mail server for E-mail print jobs and there are no mail documents waiting to be
printed, the MFC will display "NO MAIL" on the LCD panel for two seconds.
If your machine is out of paper when receiving data, the received data will be
held in the MFC's memory. This data will be printed automatically after paper is
re-inserted into the machine. Memory receive must be switched "ON".
If the received mail is not in a plain text format or an attached file is not in the
TIFF-F format, the following error message will be printed: "ATTACHED FILE
FORMAT NOT SUPPORTED. FILE NAME:XXXXXX.doc" If the received
mail is too large, the following error message will be printed: "E-MAIL FILE
TOO LARGE." If "Delete POP Receive Error Mail" is "ON" (default) then error
mail is automatically deleted from the E-mail Server.
CHAPTER 4 INTERNET FAX
4-6