Getting Connected; Front Panel Key Functions - Brother NC-8100h User Manual

Getting Connected

Before sending or receiving an Internet Fax you must configure your Brother
MFC to communicate with your network and mail server. You must ensure the
following: a correctly configured IP address for your MFC, an E-mail address for
your MFC, the mail server(s) IP address, mailbox name and password for your
Brother MFC. If you are unsure of any of these items, please contact your
systems administrator. For details of how to configure this information, refer to
the Web Based Management section (Internet Settings) of this User's Guide.

Front Panel Key Functions

Shift + [1]
Used to change input mode. You can use Dial Pad keys as Standard alphabet
character keys.
Dial Pad
Used to enter Standard Alpha characters (26 letters), as well as @ . space ! " # %
& ' () + / : ; < > = ? [ ] ^ – $ , *, _ and Numbers.
Shift + [3]
To change between upper case and lower case for entering the e-mail / I-Fax
address.
! or " ! ! ! " " "
Moves the LCD cursor to the left or right.
Set
Used to store multiple numbers.
Fax Start
Begins transmitting the document.
Stop/Exit
Deletes entered data and stops the scanning or transmitting process.
One Touch Dial / Speed Dial / Tel Index / Group Dial
These functions work the same way as with conventional MFC's.
However, please note that you cannot use chain dialling for E-mail addresses.
Shift + Start
Used to receive E-mail from the POP3 server manually.
CHAPTER 4 INTERNET FAX
4-2