Configuring Dlc On Windows - Brother NC-8100h User Manual

Configuring DLC on Windows

To use DLC on Windows
1. Log into Windows
Control Panel and double click on the Network icon. Windows
users select the properties of the Local Area Connection.
®
2. On Windows NT
®
NT 4.0 systems, click on the Protocol tab, and click Add. Windows
2000 users click the Install button from the General Tab.
3. Select DLC Protocol and then OK or Add if using Windows
may be asked for the location of the files, for Intel based computers, the
necessary files are stored in the i386 directory of the Windows
CD-ROM. If you have a non-Intel platform, specify the correct directory
on your Windows
Close (for 4.0 systems).
4. Reboot your system to make the change take effect. Windows
should not require a re-boot.
® ®
NT , you must first install the DLC protocol.
® ®
NT with administrative privileges. Go to the NT
®
3.5x systems, select Add Software. On Windows
® ®
NT CD-ROM. Click Continue (for 3.5x systems) or
11-2
CHAPTER 11 DLC PRINTING
® ®
NT /2000
®
2000
®
®
2000. You
® ®
NT
®
2000
®