4-Del Error Mail; 5-Notification; 4-Setup Mail Tx; 1-Sender Subject - Brother NC-8100h User Manual

HEADER
This selection allows the contents of the mail header to be printed when the
received message is printed (Subject+From+To or All or NONE).

4-DEL ERROR MAIL

1. Press the [Menu] button to display the configuration menu.
2. Select LAN.
3. Press [3] [4].
4. Press ! or " to select ON or OFF.
5. Press [Set] to accept the selection.
6. Press [Stop/Exit] to exit the configuration menu.
DELETE ERROR MAIL
When set to ON, the MFC automatically deletes error mails that the MFC can not
receive from the POP server.

5-NOTIFICATION

1. Press the [Menu] button to display the configuration menu.
2. Select LAN.
3. Press [3] [5].
4. Press ! or " to select ON or MDN or OFF.
5. Press [Set] to accept the selection.
6. Press [Stop/Exit] to exit the configuration menu.
NOTIFICATION
Notification feature allows a receive notification message to be transmitted to
the sending station to indicate successful reception of the I-Fax.
"ON" send notification mail to all I-Fax machines only sends an e-mail to I-Fax
that supports the "MDN" specification.

4-Setup Mail TX

This menu has three selections 1-Sender Subject, 2-Size Limit and 3-
Notification.

1-SENDER SUBJECT

1. Press the [Menu] button to display the configuration menu.
2. Select LAN.
3. Press [4] [1].
4. Select [1] to change the Sender Subject—OR—[2] to exit.
5. Enter the subject information.
6. Press [Set] to accept the selection.
7. Press [Stop/Exit] to exit the configuration menu.
SENDER SUBJECT
This field displays the subject that is attached to the Internet Fax data being sent
from the Brother MFC to a PC (default is "Internet FAX Job").
CHAPTER 2 FRONT PANEL SETUP MENU
2-10