Replacement Filter; To Replace The Filter - Bissell 3108 SERIES User Manual

Replacement Filter

As you vacuum, dirt and debris are deposited in the Dirt Cup while air passes
through the Filter before being returned to the room. This process enhances
the vacuum path while dramatically reducing dust, dirt, and potential allergens
from the air you breathe. Replacing the Filter periodically enhances vacuum
power and air quality.
Use only BISSELL Replacement Filters in your Easy Vac PowerBrush. You may
purchase these Filters from your retailer, by using the order form in this User's
Guide, by calling BISSELL Consumer Services or by visiting our website. To
locate a retailer near you, or to place an order using Visa, Mastercard, Discover
or American Express, call:
BISSELL Consumer Services
1-800-237-7691
Monday - Friday
Saturday
Or visit our Website - www.bissell.com
Replacement Filter #32047
Or for higher filtration and efficiency,
you may use Filtrete

To Replace the Filter

Remove the Dirt Cup.
1.
Grasp the Filter frame and pull it straight up from the Dirt
2.
Cup. Empty the Dirt Cup.
Replace the Filter in the Dirt Cup pushing down tightly to
3.
ensure gasket is in place. Place the small tab on the bottom
of the Cup into the bottom of the Canister cavity. Press the upper
portion of the Cup into place until the lock button snaps into place.
Checking Rotating PowerBrush and Replace Drive Belt
You should check your cleaner's rotating PowerBrush and Drive
Belt regularly for wear or damage. You should also clean the brush
and brush ends of string, hair and carpet fibers. These can wrap
around the brush and hamper its ability to effectively clean your
carpet. Also, remove any debris that has accumulated under the
brush cover.
Unplug cleaner from electrical outlet.
1.
Place unit upside down with brush roll
2.
facing upwards.
8 a.m. — 10 p.m. ET
9 a.m. — 8 p.m. ET
™ Filters #32046
WARNING:
To reduce the risk of
injury from moving parts
and/ or electrical shock,
turn Power Switch OFF
and disconnect polarized
plug from electrical out-
let before performing
troubleshooting checks.
9