Setting The Event - Samsung SRN-1000 User Manual

SETTING THE EVENT

You can configure settings regarding event recordings of sensor, camera event and video loss event.
Sensor Detection
You can set the sensor's operating condition and connected camera, as well as alarm output and its duration.
Setting NVR Sensor Detection
• Sensor Operation : Sets the operation mode of sensors.
- <N.O (Normal Open)> : Sensor is opened. If the sensor is closed, it generates alarm.
- <N.C (Normal Close)> : Sensor is closed. If the sensor is open, it generates alarm.
• Cam : Select a channel to be connected to the sensor.
If selected camera, "Cam Preset setup" window appears.
Select a channel and setup the preset.
`
Preset setup can be done in PTZ mode.
• Alarm out : Sets the alarm output method.
`
For further information on alarm output, refer to "HDD Alarm Setting". (Page 68)
• Duration : Sets the duration of alarm signal and alarm sound.
English _73