Samsung SRN-1000 User Manual page 77

Setting the Network Connection without Router
• Static
- Internet connection : Static IP ADSL, leased line, and LAN environments allows connection between the
NVR and remote user.
- NVR Network Settings : Set the <Interface> in <Network> menu of the connected NVR to <Static>.
`
Consult your network manager for IP, Gateway and Subnet Mask.
• DHCP
- Internet connection : Connect the NVR directly to a cable modem, DHCP ADSL modem or FTTH network.
- NVR Network Settings : Set the <Interface> in <Network> menu of the connected NVR to <DHCP>.
`
If IP is not assigned within 1 minute, it is set to the previous static IP.
• PPPoE
- Internet connection : An PPPoE modem is directly connected to the NVR, where the PPPoE connection
requires user ID and password.
- NVR Network Settings : Set the <Interface> in <Network> menu of the connected NVR to <PPPoE>.
`
PPPoE <ID> and <Password> should be the same to the PPPoE user information.
If you don't know the ID and password, consult your PPPoE service provider.
English _77