Samsung SRN-1000 User Manual page 68

menu setup
HDD Alarm Setting
You can set alarm settings for HDD defects such as Check Alarm Output Port, Replace Alarm Output Port, and
its duration.
• Check Alarm Output Port : If HDD generates check alarm, the alarm signal will output to the specified alarm
output port.
• Replace Alarm Output Port : If HDD generates replace alarm, the alarm signal will output to the specified
alarm output port.
• Duration : Sets the alarm duration for the alarm signal and beep sound.
- Check Alarm, Replace Alarm signals will output through the selected alarm out ports (1, 2, 3, and 4).
- If <BEEP> was selected, a beep will sound.
- If <All> was selected, both beep sound and alarm signal through rear side ports will output.
M
`
<Check> status means that the HDD is operating but it has problems that require technical examination.
( ) appears on the Live screen.
`
<Replace> status means that the HDD has defect and requires immediate replacement.
( ) appears on the Live screen.
68_ menu setup