Dram Timing Control - Asus Maximus VII Ranger User Manual

CPU Level Up [Auto]
Allows you to select a CPU level, and the related parameters will be automatically adjusted
according to the selected CPU level.
The CPU level values depends on the CPU installed in your system.
EPU Power Saving Mode [Disabled]
Allows you to enable or disable the EPU power saving function.
Configuration options: [Disabled] [Enabled]

DRAM Timing Control

The subitems in this menu allow you to set the DRAM timing control features. Use the
<+> and <-> keys to adjust the value. To restore the default setting, type [auto] using the
keyboard and press the <Enter> key.
Primary Timings
DRAM CAS# Latency [Auto]
Configuration options: [Auto] [1] – [31]
DRAM RAS# to CAS# Delay [Auto]
Configuration options: [Auto] [1] – [31]
DRAM RAS# PRE Time [Auto]
Configuration options: [Auto] [1] – [31]
DRAM RAS# ACT Time [Auto]
Configuration options: [Auto] [1] – [63]
DRAM COMMAND Rate [Auto]
Configuration options: [Auto] [1] – [2]
Secondary Timings
DRAM RAS# to RAS# Delay [Auto]
Configuration options: [Auto] [1] – [15]
DRAM REF Cycle Time [Auto]
Configuration options: [Auto] [1] – [511]
DRAM Refresh Interval [Auto]
Configuration options: [Auto] [1] – [65535]
DRAM WRITE Recovery Time [Auto]
Configuration options: [Auto] [1] – [16]
DRAM READ to PRE Time [Auto]
Configuration options: [Auto] [1] – [15]
DRAM FOUR ACT WIN Time [Auto]
Configuration options: [Auto] [1] – [255]
DRAM WRITE to READ Delay [Auto]
Configuration options: [Auto] [1] – [15]
ASUS MAXIMUS VII RANGER
3-11