Asus Maximus VII Ranger User Manual page 55

3. USB 2.0 connectors (10-1 pin USB13, USB1112; USB910)
These connectors are for USB 2.0 ports. Connect the USB module cable to any of
these connectors, then install the module to a slot opening at the back of the system
chassis. These USB connectors comply with USB 2.0 specification that supports up to
480 MBps connection speed.
Never connect a 1394 cable to the USB connectors. Doing so will damage the
motherboard!
You can connect the front panel USB cable to the ASUS Q-Connector (USB) first, and then
install the Q-Connector (USB) to the USB connector onboard if your chassis supports front
panel USB ports.
2 x USB 2.0 ports (USB13) at mid-board shares with ROG extension (ROG_EXT) port.
ASUS MAXIMUS VII RANGER
1-41