TP-Link TD-W8910G User Manual page 80

5.7.4.1. Services
Choose "Management" "Access Control" "Services", you can see the Services screen, this
screen (shown in Figure 5-74) allows you to select the services for LAN Ports and WAN Port.
After you have completed, click the Save/Apply button to make sure your selection.
Note:
WAN are not available for the connection type of Bridge here, they won't display on the screen
above since only Bridge is selected.
5.7.4.2. IP Addresses
Choose "Management" "Access Control" "IP Addresses", you can see the IP Address
screen, this screen (shown in Figure 5-75) allows you to configure the IP Address for managing
the Router.
To add the IP Address:
1. Click the Add button. You can add a new IP Address in the next screen (shown in Figure
5-76).
TD-W8910G 54M Wireless ADSL2+ Router User Guide
Figure 5-74
Figure 5-75
72