Table of Contents
Advertisement
the corresponding screen. You can refer to
connection type.
3.
MER
If you choose MER in the previous screen (shown in Figure 5-5), you can see the screen
(shown in Figure 5-9). Follow the instructions to configure the connection.
1) Configure the WAN IP Address. If you are provided a dynamic IP Address, please select
obtain an IP address automatically, and then the Router will automatically get IP
parameters from your ISP. If you are provided with a static IP Address, please select Use
the following IP Address, and then enter the WAN IP Address and WAN Subnet
Mask.
2) Configure the default gateway. If you are provided a dynamic gateway address, please
select obtain default gateway automatically, and then the Router will automatically get
gateway parameters from your ISP. If you are provided with a static gateway, please
select Use the following default gateway, and then enter the gateway address.
3) Configure the DNS. If you are provided dynamic DNS server addresses, please select
obtain DNS server addresses automatically, then the Router will automatically get
TD-W8910G
54M Wireless ADSL2+ Router User Guide
Chapter 4
Figure 5-9
25
to achieve the configuration for the
Advertisement
Table of Contents
