5.4.6.1. Default Gateway
Choose "Advanced Setup" "Routing" "Default Gateway", you can see the Default Gateway
screen, this screen allows you to configure the default gateway (shown in Figure 5-34).
If the Enable automatic Assigned Default Gateway check-box is selected, this Router will
accept the first received default gateway assignment from one of PPPoA, PPPoE or MER/DHCP
enabled PVC(s). If the check-box is not selected, enter the static Default Gateway IP and/or a
WAN Interface, you can leave the WAN Interface default. Then click Save/Apply button to save
it.
Note:
If changing the Automatic Assigned Default Gateway from unselected to selected, you have to
TD-W8910G
54M Wireless ADSL2+ Router User Guide
Figure 5-33
Figure 5-34
46