Table of Contents
Advertisement
To set the Router's time:
1.
Select automatically synchronize with Internet time servers.
2.
Select the First NTP time server and/or the Second NTP time server in the drop-down list
severally.
3.
Select your local time zone.
4.
Click Save/Apply button.
Note:
This setting will be used for some time-based functions such as firewall. You must specify your
time zone once you login to the Router successfully, if not, the time limited on these functions will
not take effect.
The time will be lost if the Router is turned off.
The Router will obtain the time automatically from Internet if it has already connected to Internet.
5.7.4 Access Control
This section provides three submenus including Services, Addresses and Password (shown in
Figure 5-73), the detailed descriptions are provided below.
TD-W8910G
54M Wireless ADSL2+ Router User Guide
Figure 5-72
Figure 5-73
71
Advertisement
Table of Contents
