Pptp; L2Tp; Telstra Big Pond; Dns - Edimax Wireless Broadband Router User Manual

2.2.4 PPTP

Select PPT P if your ISP requires the PPT P protocol to connect you to the
Internet. Your ISP should provide all the information required in this section.
(See chapter 1 "PPTP" for more detail)

2.2.5 L2TP

Select L2T P if your ISP requires the L2T P protocol to connect you to the
Internet. Your ISP should provide all the information required in this section.
(See chapter 1 "L2T P" for more detail)

2.2.6 Telstra Big Pond

Select T elstra Big Pond if your ISP requires the Telstra Big Pond protocol
to connect you to the Internet. Your ISP should provide all the information
required in this section. T elstra Big Pond protocol is used by the ISP in
Australia. (See chapter 1 "Telstra Big Pond" for more detail)

2.2.7 DNS

A Domain Name System (DNS) server is like an index of IP addresses and
Web addresses. If you type a Web address into your browser, such as
www.router.com, a DNS server will find that name in its index and the
matching IP address. Most ISPs provide a DNS server for speed and
convenience. If your Service Provider connects you to the Internet with
dynamic IP settings, it is likely that the DNS server IP address is provided
automatically. However, if there is a DNS server that you would rather use,
you need to specify the IP address of that DNS server here.
33