2d) Windows N T
1. Click the Start button and select Settings, then click Control Panel. T he
Control Panel window will appear.
2. Double-click Netw ork icon. T he Netw ork window will appear. Select the
Protocol tab from the Netw ork window.
3. Check if the TCP/IP Protocol is on your list of Network Protocols. If
T CP/IP is not installed, click the Add button to install it now. If T CP/IP
is installed, go to step 5.
4. In the Select Netw ork Protocol window, select the TCP/IP Protocol and
click the Ok button to start installing the T CP/IP protocol. You may
need your Windows CD to complete the installation.
5. After you install T CP/IP, go back to the Netw ork window. Select
TCP/IP from the list of Netw ork Protocols and then click the Properties
button.
6. Check each of the tabs and verify the following settings:
• IP Address: Select Obtain an IP address from a DHCP server.
• DNS: Let all fields are blank.
• WINS: Let all fields are blank.
• Routing: Let all fields are blank.
7. Click OK to confirm the setting. Your PC will now obtain an IP address
automatically from your Broadband Router's DHCP server.
10