Xerox 6030 User Manual page 74

Setting the Parameters from Print Services on Web
It is possible to set up the TCP/IP, Serial, Centronics (optional), VPI (optional) and
SNMP parameters from Print Services on Web. The procedures for this are explained
below.
Operation Procedure
1
2
50
Chapter 3 Setup
• The changed parameters become valid after the machine has been
rebooted.
• These procedures are performed on the Administrator Page.
Start up Print Services on Web and display the [Properties] tab on the
Administrator Page.
Refer to "2.3 Operations from Print Services on Web" for details on starting up
Print Services on Web (page29).
Select the item to be set up from the [System parameters] menu.
The setup screen will be displayed on the right-hand side of the screen.