Setup
Tip
Your phone won't
work without a SIM
card. The SIM card
is usually pre-
installed in your
Treo 680, unless
you're upgrading
from another AT&T
phone. Check the
SIM card tray to see
if the SIM card is
installed. The SIM
card tray is tucked
away in a drawer
in the battery
compartment. See
"I need to insert my
SIM card" on page
35 for more info.
If you need a SIM
card, call AT&T at:
1-800-331-0500.
2
Insert the battery
1. Remove the battery door.
2. Insert the battery into the compartment.
3. Slide the battery door back into place.
4. Connect the charger.
The touchscreen on your Palm
for the progress bar to fill and the language selection screen to appear.
Press battery door
release
®
™
Treo
680 smart device turns on. Wait
Align battery
contacts with
compartment
contacts
®
™
Palm
Treo
680