3. Select the same language you selected on your Treo 680, and then follow
the onscreen instructions.
4. When the install program asks you to sync, connect the USB sync cable to
a USB port on your computer and to the socket on the bottom of your Treo
680.
5. Press the sync button.
USB sync
cable
Messages on both your computer and your Treo indicate that synchronization
is in progress. Do not disconnect the sync cable until you see the message on
your Treo saying that the HotSync
Next time you want to sync, just connect your Treo 680 to your computer
(using the sync cable) and then press the sync button.
®
™
Palm
Treo
680
®
operation is done.
Sync button
Tip
Problems
synchronizing? See
"Synchronization
isn't working" on
page 36 for
troubleshooting
suggestions.
23