Link Aggregation Setting - ZyXEL Communications GS1920 Series User Manual

Chapter 17 Link Aggregation
The following table describes the labels in this screen.
Table 52 Advanced Application > Link Aggregation Status
LABEL
Group ID
Enabled Ports
Synchronized
Ports
Aggregator ID
Criteria
Status

17.3 Link Aggregation Setting

Click Advanced Application > Link Aggregation > Link Aggregation Setting to display the
screen shown next. See
134
DESCRIPTION
This field displays the group ID to identify a trunk group, that is, one logical link containing
multiple ports.
These are the ports you have configured in the Link Aggregation screen to be in the trunk
group.
The port number(s) displays only when this trunk group is activated and there is a port
belonging to this group.
These are the ports that are currently transmitting data as one logical link in this trunk
group.
Link Aggregator ID consists of the following: system priority, MAC address, key, port priority
and port number. Refer to Section on page 133
The ID displays only when there is a port belonging to this trunk group and LACP is also
enabled for this group.
This shows the outgoing traffic distribution algorithm used in this trunk group. Packets from
the same source and/or to the same destination are sent over the same link within the trunk.
src-mac means the Switch distributes traffic based on the packet's source MAC address.
dst-mac means the Switch distributes traffic based on the packet's destination MAC
address.
src-dst-mac means the Switch distributes traffic based on a combination of the packet's
source and destination MAC addresses.
src-ip means the Switch distributes traffic based on the packet's source IP address.
dst-ip means the Switch distributes traffic based on the packet's destination IP address.
src-dst-ip means the Switch distributes traffic based on a combination of the packet's
source and destination IP addresses.
This field displays how these ports were added to the trunk group. It displays:
• Static - if the ports are configured as static members of a trunk group.
• LACP - if the ports are configured to join a trunk group via LACP.
Section 17.1 on page 132
for more information on this field.
for more information on link aggregation.
GS1920 Series User's Guide