Switch Setup Screen - ZyXEL Communications GS1920 Series User Manual

See Chapter 9 on page 84

8.5 Switch Setup Screen

Click Basic Setting > Switch Setup in the navigation panel to display the screen as shown. The
VLAN setup screens change depending on whether you choose 802.1Q or Port Based in the VLAN
Type field in this screen. Refer to
Figure 42 Basic Setting > Switch Setup
The following table describes the labels in this screen.
Table 10 Basic Setting > Switch Setup
LABEL
VLAN Type
MAC Address Learning: MAC address learning reduces outgoing broadcast traffic.
Aging Time
ARP Aging Time
Aging Time
GARP Timer: Switches join VLANs by making a declaration. A declaration is made by issuing a Join message
using GARP. Declarations are withdrawn by issuing a Leave message. A Leave All message terminates all
registrations. GARP timers set declaration timeout values. See the chapter on VLAN setup for more
background information.
Join Timer
GS1920 Series User's Guide
for information on port-based and 802.1Q tagged VLANs.
Chapter 9 on page 84
DESCRIPTION
Choose 802.1Q or Port Based. The VLAN Setup screen changes depending on whether
you choose 802.1Q VLAN type or Port Based VLAN type in this screen. See
page 84 for more information.
Set the duration of time interval (from 30 to 65536) in seconds; the default is 300 seconds.
Set the duration of time interval (from 30 to 65536) in seconds; the default is 300 seconds.
Join Timer sets the duration of the Join Period timer for GVRP in milliseconds. Each port has
a Join Period timer. The allowed Join Time range is between 100 and 65535 milliseconds;
the default is 200 milliseconds. See the chapter on VLAN setup for more background
information.
Chapter 8 Basic Setting
for more information on VLAN.
Chapter 9 on
63