Access Control; Chapter 37 Access Control; Access Control Overview; What You Can Do - ZyXEL Communications GS1920 Series User Manual

37.1 Access Control Overview

This chapter describes how to control access to the Switch.
One FTP session, up to five Web sessions (five different user names and passwords) and/or limitless
SNMP access control sessions are allowed.
Table 139 Access Control Overview
FTP
One session

37.1.1 What You Can Do

• Use the Access Control screen
• Use the SNMP screen
• Use the Trap Group screen
should be sent to each SNMP manager.
• Use the User Information screen
authentication with managers using SNMP v3 and associate them to SNMP groups.
• Use the Logins screens
via web configurator at any one time.
• Use the Service Access Control screen
may use to access the Switch.
• Use the Remote Management screen
more "trusted computers" from which an administrator may use a service to manage the Switch.

37.2 The Access Control Main Screen

Use this screen to display the main screen.
Click Management > Access Control in the navigation panel to display the main screen as
shown.
GS1920 Series User's Guide
C
Web SNMP
Up to five accounts No limit
(Section 37.2 on page
(Section 37.3 on page
(Section 37.3.1 on page
(Section 37.3.3 on page
(Section 37.4 on page
(Section 37.5 on page
(Section 37.6 on page
HAPTER

Access Control

289) to display the main screen.
290) to configure your SNMP settings.
291) to specify the types of SNMP traps that
293) to create SNMP users for
295) to assign which users can access the Switch
296) to decide what services you
297) to specify a group of one or
3 7
289