Table of Contents
Advertisement
DATA CHANNEL CONNECTION
My Instant Communicator uses the data channel
to communicate with your company's telephone
system. Your mobile can access the WiFi, 3G/3G+
or GSM network, depending on its configuration.
In order to reduce communication costs as much
as possible, the application will use the WiFi
The My Instant Communicator application will only
use a WiFi connection if you have previously
configured it to do so. Windows Mobile® does not
activate WiFi instantly. Connection to a WiFi
ACTIVATE / DEACTIVATE THE DATA CHANNEL CONNECTION
To keep control of costs, you can prevent the My
Instant Communicator application from using the
Press and release
Select the current data
connection status
Activate the data channel for
the My Instant Communicator
application
Deactivate the data
channel for the My Instant
Communicator application
In certain conditions, such as travelling abroad, for
example, use of the data channel can incur a
surcharge that is not covered by your tariff. Contact
Deactivating the data channel for My Instant
Communicator does not prevent other applications
8AL 90820 AAAB
April 2010 -
WIFI
3G/3G+
Data channel network preferences
ed 01
OmniTouch 8600 My Instant Communicator
network if it is accessible, then the 3G/3G+
network. If neither of these networks is
accessible, the application will use the GSM
network to process calls.
GSM
network can sometimes take some time, for example
when changing from a 3G/3G+ network to a WiFi
network.
data channel at any time.
your operator for further information. You can
activate or deactivate the data channel at any time.
from using the mobile's data channel.
Mobile Edition
Page 13
Advertisement
Table of Contents
