Fluke 1625-2 User Manual page 46

1625-2
Users Manual
To save a code:
1. Press all 4 keys simultaneously and move central selector from OFF to the desired
2. Now enter the CODE number. Any three-digit number can be entered.
Once a CODE has been entered, all subsequently programmed values can
only be changed after entering the CODE number. Once a "CODE" has
been entered, it cannot be erased or changed unless it is known. Be sure to
record your personal "CODE" and store in a safe location.
3. Inputting the code is done by means of the "CHANGE ITEM" and "SELECT" keys.
4. Pressing the "DISPLAY MENU" key completes input.
5. If the display "C ON" is acknowledged by pressing "DISPLAY MENU", the first
If the limit values required by regulations are changed incorrect, erroneous
test results may be displayed.
To delete a code:
1. Press all 4 keys simultaneously and move central selector from OFF to any
2. Now enter the existing CODE number.
3. Inputting the code is done by means of the "CHANGE ITEM" and "SELECT" keys.
38
measuring mode.
The display shows "C _ _ _".
The CODE is now stored, and the display shows "C ON ".
parameter of the selected measuring function is displayed and can be changed with
the "CHANGE ITEM" and "SELECT" keys.
a. The changed value is stored by pressing the "DISPLAY MENU" key.
b. Pressing the "START TEST" key exits the setting program.
measuring mode.
The display shows " C _ _ _ ".
Pressing the "DISPLAY MENU" key completes input.
Note
Note