Gemini GEM-DXK2 Operating Manual page 18

A C O N
A C O N
r e s e t F I R E A L A R M D s p F i r / A l a r m /
A C O N
T R O U B L E
A C O N
T u r n O n / O v i e w
A C O N
A C O N
18
F U N C T I O N M E N U
Display Telephone List?
D s p T e l / L i s t /
grammed?
Y e s / N o
Select Telephone #1-4 using the NEXT and PRIOR buttons. Press
to automatically dial the displayed number.
Display System Troubles?
D s p S y s / T r b l /
(EXX-NN) representing the problem (XX) detected in the system, followed by 2 digits (NN)
Y e s / N o
identifying the problem zone, keypad, module, etc.
CODES for a description of these codes). Use NEXT and PRIOR buttons to scroll system
troubles.
Display Fire Alarms?
Y e s / N o
the Fire Zone(s). Press the NEXT and PRIOR buttons to scroll zones.
Display Fire Troubles?
D s p F i r / T r b l /
been detected on the Fire Zone(s). Use NEXT and PRIOR to scroll fire troubles.
Y e s / N o
Activate Overview?
for user?
Y e s / N o
In a partitioned system, this mode displays the status of Areas 1 and 2 simultaneously. (The
"READY1" display will be replace by the "OV(--)" display shown at left). For each area: "R" =
Area Ready; "z" = Zone Fault; "A" = Area Armed; "B" Burglary Zone in Alarm; "F" Fire Zone in
Alarm; "T" = Fire Trouble; "c" = Check Trouble; Area in Function-Display Mode.
O V ( R Z )
In this mode, all areas (except the area that you are in) may be armed by pressing
then entering a valid User Code. (The User Code must be valid in all areas). Similarly, all ar-
eas may be disarmed by pressing
to normal keypad operation, enter a valid code, press
appears, then press the YES (
(For GEM-P9600/3200 panels only)
YES NO) The panel can dial any of four programmed telephone numbers.
(For GEM-P9600/3200 panels only)
(For GEM-P9600/3200 panels only)
(For GEM-P9600/3200 panels only)
(For GEM-P9600/3200 panels only)
YES NO)
0
) button.
P
(OPTIONAL--Phone Numbers Pro-
U
Displays a 2-digit error code
(See SYSTEM TROUBLE ERROR
Displays alarms that have occurred on
Displays trouble conditions that have
(OPTIONAL) (Overview programmed
, , then entering a valid User Code. To revert
G
repeatedly until "TrnOff O View"
R
, then pick up the phone
. ,
9 G