Table of Contents
Advertisement
Replacing and adjusting the top transport belts
Figure 28: Adjusting the top transport belts
Adjusting steps
Adjusting the tension
1. Loosen the fastening screw (2).
2. Turn the corresponding eccentric was? (1) with a standard screwdriver
3. Tighten the fastening screw (2).
4. Repeat steps 1 – 3 for the other transport belt
Setting the distance to the run-off protection
1. Release both screws (5) on the run-off protection (4).
2. Push the run-off protection (4) up or down until the clearance to the top
3. Tighten both screws (5) on the run-off protection (4).
Service Instructions 650-16 Version 00.0 - Last Updated 09/2012
(1) - Eccentric (was?)
(2) - Fastening screws
in order to change the tension.
right transport belt (3) is 0.2 – 0.3 mm.
(3) - Top right transport belt
(4) - Run-off protection
(5) - Screws
38
Advertisement
Table of Contents
