Table of Contents
Advertisement
Replacing and adjusting the top transport belts
Fitting the top transport belts
Important: When fitting new transport belts, observe the arrow marks: the
arrows must point in direction of rotation.
Figure 27: Fitting the top transport belts
(1) - Screw
(2) - Sewing feet
(3) - Central foot
Adjusting steps
1. Push the right sewing foot down and the left sewing foot up.
2. Insert the right transport belt in the right sewing foot.
3. Route the right transport belt through the guide (5).
4. Place the right transport belt on the larger of the two pulleys (6).
5. Turn the transport belt wheel (6) slowly so that the belt lines up.
6. Push the right sewing foot up and the left sewing foot down.
7. Insert the left transport belt in the left sewing foot.
8. Insert the central foot (3) and secure with screw (1).
9. Route the left transport belt through the guide (5).
10.Place the left transport belt on the smaller of the two pulleys (6).
11.Turn the pulley (6) slowly so that the belt lines up.
Order
After replacing the top transport belts you must adjust the central foot
( Chap. 10 Adjusting the central foot, p. 31).
Service Instructions 650-16 Version 00.0 - Last Updated 09/2012
(4) - Top transport belts
(5) - Guide
(6) - Pulleys
36
Advertisement
Table of Contents
