Icom IC-F9011B Instruction Manual page 30

7
OPTIONS
D About VS-1MC
VOX gain and delay adjustment
q Attach the connector of the VS-1MC into the multi-connec-
tor on the transceiver and tighten the screw.
• Toggle the VOX/PTT select switch to [VOX].
w Enter user set mode. (p. 14)
e Push [Ω] several times to select the "VOX Gain" or "VOX
Delay" items. Then, push [∫] or [√] to set the desired level/
condition.
r Push and hold [Ω] again to exit the user set mode.
• Until turning power OFF, [Ω], [∫] and [√] is not activated as the
assigned key function.
These adjustments are for Simple/10-key types only.
• VOX Gain
The VOX sensitivity level can be adjusted from OFF or 1 to 6
(more sensitive).
VOX OFF
MON CLCK
VOX function is OFF
25
(Continued)
/
vox ptt case
Push
VOX GAIN 3
[∫] [√]
or
ZONE MON CLCK
VOX gain level 3
(default)
• VOX Delay
The VOX delay time can be set from 0.5 to 3.0 sec. (0.5 sec.
step) for a convenient interval before returning to receive.
VOX DLY0.5
MON CLCK
0.5 sec (min.)
(default)
If your voice is detected, "TX" appears on the LCD as
shown below during the VOX gain or VOX delay adjust-
ment. (The transmission is not performed.)
VOX GAIN 3TX
ZONE
MON
VOX gain adjustment
NOTE: MIC/VOX gain can be adjusted via the Adjusting
pot using a thin screw driver.
Push VOX DLY3.0
[∫] [√]
or
ZONE MON
3.0 sec (max.)
Appear
VOX DLY3.0TX
CLCK ZONE MON
VOX delay adjustment
CLCK ZONE
CLCK ZONE