Icom IC-F9011B Instruction Manual page 13

D For All types
(Different operation with Non-display type)
When the following key functions are programmed to Non-
display type, the key functions may be limited and some key
functions should be operated differently from Simple and
10-key types.
HIGH/LOW KEY "H/L"
Push to select the transmit output power temporarily or per-
manently, depending on the pre-setting.
• Ask your dealer for the output power level for each selection.
• Emits one beep when Low 1 is selected, two beeps when Low 2 is
selected and three beeps when High is selected. (Non-display type
only)
SCAN KEY "SCAN"
❍ For Simple/10-key types
➥ Push to start and cancel scanning operation.
• When the Power ON Scan, Auto Scan, or Rotary Selector
Home function starts a scan, push this key to cancel the scan.
The canceled scan resumes after the specified time period has
passed.
➥ Push and hold this key for 1 sec. to indicate the scan list,
then push [CH Up] or [CH Down] to select a desired list.
(Depending on the presetting.)
❍ For Non-display type
Push to start and cancel scanning operation.
• When the Power ON Scan, Auto Scan, or Rotary Selector Home
function starts a scan, push this key to cancel the scan. The can-
celed scan resumes after the specified time period has passed.
• The LED indicator blinks green slowly while scanning.
PANEL DESCRIPTION
SURVEILLANCE KEY "SURV"
When this function is turned ON, the beep is not emitted and
the LCD backlight does not light when a signal is received or
a key is pushed.
❍ For Simple/10-key types
Push to turn the surveillance function ON or OFF.
❍ For Non-display type
➥ Push and hold for 1 sec. to turn the surveillance function
ON.
➥ When the surveillance function is ON, push to turn the
function OFF.
TALK AROUND KEY "TA" (Conventional operation only)
The talk around function equalizes the transmit frequency to
the receive frequency for transceiver-to-transceiver commu-
nication.
❍ For Simple/10-key types
Push to turn the talk around function ON or OFF.
❍ For Non-display type
➥ Push and hold for 1 sec. to turn the talk around function
ON.
➥ When the talk around function is ON, push to turn the
function OFF.
2
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
8