Scan Operation; Scan Types - Icom IC-M32 Instruction Manual

5

SCAN OPERATION

■ Scan types

Scanning is an efficient way to locate signals quickly over a
wide frequency range. The transceiver has priority scan and
normal scan.
In addition, the weather alert and auto scan function is
available for standby convenience. These functions can be
activated simultaneously, depending on the settings in SET
mode. (pgs. 18, 19)
PRIORITY SCAN
CH 01
WX*
CH 05
* Previously selected weather channel
when weather alert function is ON
Priority scan searches through all tag channels in sequence
while monitoring Channel 16. When a signal is detected on
Channel 16, scan pauses until the signal disappears; when
a signal is detected on a channel other than Channel 16,
scan becomes dualwatch until the signal disappears.
14
CH 02
CH 16 CH 03
CH 04
Set the tag channels (scanned channel) before scanning.
Clear the tag channels which inconveniently stop scanning,
such as digital communications.
Choose priority or normal scan in SET mode. (p. 18)
NORMAL SCAN
CH 01
WX*
CH 05
* Previously selected weather channel
when weather alert function is ON.
Normal scan, like priority scan, searches through all tag
channels in sequence. However, unlike priority scan,
Channel 16 is not checked unless Channel 16 is set as a
tag channel.
CH 02
CH 03
CH 04