Remote And System Operations; Passive Locking; Auto Re-Locking - Viper 4706V Owner's Manual

Remote and System Operations

Passive Locking*

Park and exit the vehicle, after the doors are closed the Passive Lock-
ing countdown begins. The led flashes quickly and upon reaching 20
seconds the horn honks once. At 30 seconds the system Locks itself.
Anytime before the system Locks you can re-enter the vehicle to load or
unload items and, after closing passive Locking resumes.
To stay secure in case of accidental Unlocking the system, if a door is
not opened within 30 seconds the system re-Locks itself and re-locks
the doors.

Auto Re-Locking*

Auto re-Lock ensures the vehicle stays protected if it is not entered after
Unlocking by remote control. After Unlocking by remote, the system
automatically re-Locks itself (and locks the doors if programmed on) in
30 seconds. Open any point of entry to stop the Lock until the next
Unlock by remote.
Onetime Bypass*
Turn the ignition On for one to three seconds and then Off. The horn
honks once to confirm one-time bypass is enabled.
One-time bypass can be used to temporarily bypass the Passive Lock-
ing operation for one cycle. It also bypasses the comfort closure and
auxiliary channel outputs programmed to activate when Locking. After
the next Unlock all operations return to normal.
* These features must be turned on by an authorized Directed dealer.
© 2013 Directed. All rights reserved. 35 35