Wireless; Basic - TP-Link TD-W8968 User Manual

TD-W8968

4.6 Wireless

Choose "Wireless", there are six submenus to configure Wireless LAN settings. Click any of them,
and you will be able to configure the corresponding function. The detailed explanations for each
submenu are provided below.

4.6.1 Basic

Choose "Wireless" "Basic", you will see the screen of Wireless--Basic settings shown as below.
The basic settings for wireless networking are set on this screen.
This page allows you to configure basic features of the wireless LAN interface. You can enable or
disable the wireless LAN interface, hide the network from active scans, set the wireless network
name (also known as SSID) and restrict the channel set based on Region requirements.
Enable Wireless: If you want to use wireless features, you must select "Enable Wireless". If
you deselect "Enable Wireless" option, all the Wireless settings below will be disabled.
Hide SSID Broadcast: When wireless clients survey the local area for wireless networks to
associate with, you can select this option to avoided being surveyed.
Clients Isolation: Select this option to enable AP isolation function so that stations associated
to the AP will not be able to communicate with each other.
Wireless Network Name: Wireless network name shared among all points in a wireless
network. The SSID must be identical for all devices in the wireless network. It is case-sensitive
and must not exceed 32 characters (use any of the characters on the keyboard). Make sure
300Mbps Wireless N USB ADSL2+ Modem Router User Guide
Figure 4-70
62