Upnp; Interface Grouping - TP-Link TD-W8968 User Manual

TD-W8968
You can select the modulation type, phone line pair and the capability of Bitswap or SRA. After
you set them up, click Save/Apply to save the configurations.

4.4.14 UPnP

Choose "Advanced Setup" "UPnP", you can Enable or Disable the UPnP (Universal Plug and
Play) protocol on the screen.
UPnP (Universal Plug and Play) is a distributed, open networking standard that uses TCP/IP for
simple peer-to-peer network connectivity between devices. An UPnP device can dynamically join
a network, obtain an IP address, convey its capabilities and learn about other devices on the
network. In turn, a device can leave a network smoothly and automatically when it is no longer in
use. UPnP broadcasts are only allowed on the LAN.
Select the checkbox and click Save/Apply to enable the UPnP function.

4.4.15 Interface Grouping

Choose "Advanced Setup" "Interface Grouping", you can configure multiple ports to PVC and
bridging groups to perform as an independent network.
300Mbps Wireless N USB ADSL2+ Modem Router User Guide
Figure 4-58
Figure 4-59
54