Advertisement
Battery Installation
NOTE: ADJUST iPad/iPhone/iPod
VOLUME TO AVOID DISTORTION
NOTE: THIS UNIT DOES NOT
CHARGE ANY DEVICE
Audio patch cord
Power On/Off Button
Using the iDM3
Bottom Panel
Thank you for purchasing the iDM3. Designed to work with your iPad,
iPhone, iPod (with or without cases), or other audio device, this system
provides high quality audio with EXB circuitry for expanded bass. Please
read the instructions carefully before operating the unit and keep for future
reference.
Installing/Replacing Batteries
1. Push in and slide up to open the battery compartment door located on
the front of the unit.
2. Insert 4 "AA" (LR6) batteries (not included), checking that the + and –
ends of the batteries match the drawing inside the battery compartment.
We recommend the use of alkaline batteries for longer life.
3. Replace and close the battery compartment cover.
For Best Performance
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc) or rechargeable batteries.
• Make sure you dispose of batteries properly (see your local regulations).
Listening to an iPad/iPhone/iPod/MP3 player or other audio device
1. Plug the attached audio patchcord located on the bottom of the unit
into the headphone or Line-out Jack on your iPad, iPhone, iPod or other
audio device.
2. Turn on your iPad, iPhone,iPod/MP3 player or other audio device,
activate music play and set desired volume.
3. Press the Power Button located on the right side of the unit. The icon
on the button will light up, indicating the unit is on.
Adjust volume on music player as needed.
4. Remember to turn unit and audio device OFF when not in use to save
batteries.
NOTE: Connected iPhones can create audio interference noise when
a call is received or when periodically communicating with cell phone
towers. Turn on Airplane mode to disable phone while playing music.
Maintenance
• Place the unit away from sources of direct sunlight or excessive heat.
• Protect your furniture when placing your unit on a natural wood and
lacquered finish.
• Clean your unit with a soft cloth moistened only with mild soap and
water. Stronger cleaning agents, such as Benzine, thinner or similar
materials can mar the surface.
For models that require more than one battery
• Do not mix with used or other battery types/brands
• Replace all batteries at the same time
• Do not open batteries
• Do not dispose of in fire
• Do not heat above 75ºC (167ºF)
• Do not expose contents to water
Printed in China
• Do not charge or recharge
iDM3-033111-English
• Do not install backwards
Advertisement
