Related Manuals for iHome iDM14
Summary of Contents for iHome iDM14
- Page 1 Model: iDM14 portable rechargeable Bluetooth stereo speakers Questions? Visit www.ihomeaudio.com...
-
Page 2: Table Of Contents
Introduction Thank you for purchasing this unit. This product is designed to provide high quality wireless sound for your iPad, iPhone, iPod, computer, PDA or other Bluetooth audio device. Along with the included Quick Bluetooth Connection Guide,this instruction booklet explains the basic operation and care of the unit. - Page 3 FCC Information FCC ID:EMOIDM14 IC:986B-IDM14 FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
- Page 4 Internal Rechargeable Lithium-ion Battery This device uses an internal rechargeable lithium-ion battery that should last the lifetime of the device. If you suspect your battery may be dead, try charging it several times. If the battery does not recharge, please contact us for repair information.
-
Page 5: Meet Your Unit
Meet Your Unit Top/Front Right Speaker Volume Down Button Pairing Indicator Light Power Button Bluetooth/Speakerphone/Play Power/Charging /Pause Button Indicator Light Built-in Microphone (behind speaker grill) Volume Up Button Left Speaker Rear of Speakers Right Speaker Micro USB Line-in from Charging/ Right Speaker Audio in Port Travel Lock/Aux/... - Page 6 Meet Your Unit Included • iDM14 system (2 x speakers) • 24 inch micro USB to USB/3.5 mm charging and aux. audio cable • 24 inch 3.5 mm stereo connection cable Travel Lock: a. Move the Travel Lock switch on the back of the right...
-
Page 7: Charging The Unit
Charging the Unit Power/Charging Indicator Light 1. Connect the micro USB plug to the micro USB charging port on the back of the Right speaker. 2. Connect the standard USB plug end of the cable to a power USB port on a computer or other USB charging device. -
Page 8: Using Bluetooth:pairing Your Device
Using Bluetooth: Pairing Your Device NOTE: See the iDM14 Bluetooth Connection Guide for complete pairing details. 1. Move the Travel Lock/Aux/Bluetooth Switch on the back of the right speaker to the Bluetooth position (right). 2. Press and hold the Button to turn on the unit (release when light appears blue). -
Page 9: Playing Audio Via Bluetooth
Playing Audio Via Bluetooth 1. Move the Travel Lock/Aux/Bluetooth Switch to the Bluetooth position to listen to audio streamed wirelessly from your paired iPad, iPhone, iPod or other Bluetooth device. 2. Connect the Left and Right speakers using the 3.5 mm stereo connection cable. 3. -
Page 10: Playing Audio Via Aux/ Troubleshooting
Unit doesn’t respond (no power) • Make sure unit is completely charged. Check that all connections are correct and properly plugged in. Make sure your device is properly paired with the iDM14. • Make sure the Travel Lock/Aux/Bluetooth Switch is not in the position, as this will disable operation. -
Page 11: Consumer Product Safety Guide
Consumer Product Safety Guide IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. - Page 12 Limited 90 Day Warranty iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI Technologies), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of 90 days from the date of original purchase.