Color changing recgargrable bluetooth speaker with speakerphone (17 pages)
Summary of Contents for iHome iBT10
Page 1
Model: iBT10 Dual Purpose Rechargeable Bluetooth Speaker CHARGE BEFORE instruction manual Questions? Contact Customer Service at 1-800-288-2792...
This unit is compatible with the iHome Enhance App. Download it from the Apple App Store or from Google Play Store and link your device (select “iHome iBT10 app” on Bluetooth menu after tapping Setup Device from the app’s menu). You can then make custom color adjustments and more.
Table of Contents Introduction/Maintenance .................................1 Table of Contents..................................2 Included ......................................3 Meet Your iBT10.................................... 4 Charging the Unit..................................5 Reviewing Battery Charge Level ............................6 Pairing Your Device..................................7 Playing Audio Via Bluetooth/Speakerphone Operation................... 8 Wireless Stereo Operation............................... 9 Playing Audio Via Aux In.................................10 Color Change Mode..................................
Meet Your iBT10 Back Panel Front Panel Color Mode/ Play/Pause/Bluetooth/ Battery Check Button Talk/End Button Aux-in Jack Lantern Button Power Button Volume – /Volume + Buttons Reset port USB In Charging Port to charge lantern Top Panel Blue Power/Bluetooth...
Color Mode Button. The cabinet lights will flash green from bottom and hold the to top to show unit is charging. Solid red indicates unit is charging Charge via included USB AC adaptor or other powered USB port iHome iBT10 USB in port USB AC adaptor (not included)
Using the Reviewing Battery Charge Level (Charger is disconnected and unit is ON) 1. Press and hold the Color Mode Button when unit is ON but not charging (micro USB cable is not connected) to enter Battery Review Mode. Built in voice will announce battery level.
Pairing is the set-up process to introduce your Bluetooth-capable device to the iBT10. Once your device is paired, the iBT10 can recognize it and you can play your audio through it. 1. Turn on your Bluetooth device and make it “discoverable” by turning on Bluetooth mode (look in Options or Settings).
Playing Audio Via Bluetooth Once the iBT10 is paired to a device, it will attempt to autolink when the unit is turned on and the device is within range (about 33 feet). If there is no audio signal for 15 minutes (Bluetooth or Aux), the unit will power o to save battery life (except in color change and lantern modes).
Using the Wireless Stereo Operation The iBT10 has built-in wireless stereo capability. Link to another iBT10 speaker (sold separately) to enjoy real wireless stereo sound. 1. Power on BOTH iBT10 speakers. 2. Press and hold the Talk/End/Bluetooth Pairing Button and the – Volume Button together on one speaker then on the next within 10 seconds to link speakers.
4. Press the – or + Volume Buttons to adjust the system volume. You can also adjust volume on your device. NOTE: If using 2 linked iBT10 speakers in Wireless Stereo mode, make sure to connect your aux audio device to the LEFT channel speaker only.
Using the Color Change Mode 1. Press and hold the Power Button for 2 seconds to turn unit on. 2. Press the Color Mode Button to cycle through color changing modes. Slow Fade: Colors gently blend through the spectrum from bottom to top Fast Change: Colors flash quickly through the spectrum...
Using the Lantern Mode Power Button for 2 seconds to turn unit on. 1. Press and hold the 2. Press the Lantern Button to cycle through the following lantern modes: High: White LEDs at 100% brightness Mid: White LEDs at 50% brightness...
Internal Rechargeable Lithium-ion Battery This device uses an internal non-replaceable rechargeable lithium-ion battery that should last the lifetime of the device. If you suspect your battery may be dead, try charging it for an extended period of time and try resetting the unit.
Consumer Product Safety Guide IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference.
FCC Information FCC ID:EMOIBT10 FCC Radiation Exposure Statement IC:986B-IBT10 This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
• Make sure unit is completely charged. • Check that all connections are correct and properly plugged in. • Make sure your device is properly paired with the iBT10. • Make sure the unit is on Unit doesn’t respond (locked up/ “frozen”) If the unit does not respond, try resetting the unit.
Limited 1 Year Warranty iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of one (1) year from the date of original purchase.