Step-By-Step Configuration; Fsp-5000-Rps - Bosch FPA-5000 User Manual

10 en | Step-by-Step Configuration
4

Step-by-Step Configuration

4.1

FSP-5000-RPS

1.
2.
3.
4.
5.
Notice!
The settings must match the network adapter/card settings of the computer the FSM-5000-
OPC Server will be installed on!
The values of Net Group and Node Address, the RSN and the IP address are required to
configure the OPC server.
6.
7.
8.
9.
10. Confirm your changes with OK and leave the dialog.
11. Double-click on the "FPA-5000" node, e.g. "FPA 5000 – 1.1 – RSN
12. Select OPC Server under a vacant Inserted address card(s) field.
Notice!
It is mandatory that this FPA-5000 node is then assigned to the OPC server!
13. Choose the country and the language from the list
Notice!
Take care about the country and language settings. BIS 2.x will display commands and
detector names in the selected language.
14. Confirm your settings with OK and leave the dialog.
15. Double click on Assigned servers.
16. Assign the panel to the OPC server. Repeat this task for each node that is to transmit its
17. Confirm your changes with OK and leave the dialog.
2013/05 | 2.0 | F.01U.261.550
Open the FSP-5000-RPS programming software.
In an existing 2.x configuration select "Nodes" in the tree view and choose "Create
FPA-5000 OPC- Server" in the context menu.
A new node with name FPA-5000 OPC-Server is created and a dialog box for configuration
is opened.
Configure the OPC server node.
Enter the virtual RSN and logical node.
Choose IP Settings... to enter the IP settings dialog.
Edit the fields accordingly. IP Address and Subnet Mask are mandatory fields, Gateway
is optional.
Confirm your changes with OK and leave the dialog.
Double-click on the FPA-5000 panel node that will be physically connected to the
Ethernet.
A dialog box for configuration opens.
Choose IP Settings... to enter the IP settings dialog.
Edit the fields accordingly. Panels not directly connected to the Ethernet are not assigned
an IP address.
A dialog box for FPA-5000 additional configuration opens
A dialog box opens.
states to the OPC server.
User Guide
FPA-5000 OPC-Server
Bosch Sicherheitssysteme GmbH